Showroom Programme; Factory Default Setting; To Close The "Settings J" Menu - Miele Dishwasher Operating Instructions Manual

Settings menu J

Showroom programme

This programme is for display use
only.
The dishwasher is fitted with various
demonstration programmes for
showroom use.
The Demo mode and Demo mode in
continuous loop programmes
demonstrate operation and functions.
Demo mode
– :
This programme is started by
pressing any button. It will run
through once and then has to be
started again.
Demo mode in continuous loop
–
This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.
Demo with sound
–
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
Demo programme:
–
Using for the first time is disabled in
the display.
Drying plus demo:
–
The door will open automatically.
78
:
:
Switching Demo mode on
^ Select the option you want and
confirm this with
^ Confirm the following questions with
OK
.
^ If necessary, press any button to start
the Demo mode you have selected.
^ To cancel it, press any button and
confirm it with
Switching Demo mode off
^ Select
Off
and confirm with
^ Confirm Switch demo mode off?
OK
with

Factory default setting

If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.
^ Confirm
Reset factory default
settings?
with
^ Confirm the message
reset to factory default.

To close the "Settings J" menu

Press < to come out of the "Settings
J" menu and return to the main menu.
OK
.
OK
.
OK
OK
.
All settings
with
.
OK
.