Starting A Programme; Time Display - Miele Dishwasher Operating Instructions Manual

Starting a programme

^ Select the
Start
Please close the door
The message
will appear.
If you want to select a different
programme or make other changes,
Back
select the menu option and
cancel the programme with the
function.
^ Close the door.
The In-operation indicator light comes
on to show that a programme has been
started.
The programme will begin. If you open
Crockery can be added
the door
appear in the display.
As long as this prompt is showing,
crockery can be added without
compromising the wash results.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
option.
Cancel
will

Time display

The duration of the programme
selected appears in hours and minutes
in the Time display before the
programme begins. During the
programme, the time left until the end of
the programme is displayed.
The time displayed may vary with the
same programme. This is partly
because of the water temperature at
each intake, and partly because of the
amount of crockery and how dirty it is.
When a programme is selected for the
first time, the display shows an average
time for a cold water intake.
The times shown in the Programme
Chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.
Operation
37