Installation And Quick Setup Tips - Cortelco 2720 Instruction Manual

Quick Setup — Multi-Phone Configuration
The following are quick setup instructions for the phone:
1. Press MENU/OPTION button down for three seconds once to enter
program mode.
2. Press MENU to leave language as English.
3. Enter your Area Code and press MENU.
4. Press MENU to skip the second Area Code option.
5. Press MENU to leave the LDS Code as 1.
6. Press MENU to skip setting the time (Caller ID will set the time when the
phone gets a call).
7. Press MENU to skip Flash timer set at 600ms.
8. Press MENU to skip Ringer Cadence, default is 3.
9. Press MENU to skip Ringer Volume, default is 5.
10. Enter the voice mail access number then, press MENU. (See below.)
11. Press MENU to skip the #3 Pause.
12. Press MENU to skip the VM password.
13. Press MENU to skip hold mode.
14. Press MENU to skip release mode.
15. Press MENU to skip SDT time.
Press MENU one last time and your quick setup is complete.
Always remember you can hold MENU down for three seconds, then press
MENU the corresponding amount of times as the number above to reach the
desired feature to adjust.
Example: To change the ringing volume on line 1, hold down MENU for
three seconds, then press MENU 13 times. From here you can use the up
and down arrow to adjust the volume.
6