Inspecting The Package And Product; Getting Started - GE MultiLink ML600 Instruction Manual

GE Consumer & Industrial
Multilin
1.1

Getting Started

1.1.1

Inspecting the Package and Product

MULTILINK ML600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
Multilink ML600
Ethernet Communications Switch
Chapter 1: Introduction
Introduction
Examine the shipping container for obvious damage prior to installing this product; notify
the carrier of any damage that you believe occurred during shipment or delivery. Inspect
the contents of this package for any signs of damage and ensure that the items listed
below are included.
This package should contain:
• MultiLink ML600 Ethernet Switch
• External AC adapter (for ML600-AC-** units)
• Set of metal panel mounting clips and screws (2 each)
Remove the items from the shipping container. Be sure to keep the shipping container
should you need to re-ship the unit at a later date.
In the event there are items missing or damaged, contact the party from whom you
purchased the product. If the unit needs to be returned, please use the original shipping
container if possible. Refer to Troubleshooting on page 4–5, for specific return procedures.
1–1