Safety Information - Huffy green machine Owner's Manual

Safety Information

PLEASE READ AND FULLY UNDERSTAND THIS OWNERS MANUAL BEFORE
OPERATING THE PRODUCT
This symbol is important. It is the WARNING symbol. The warning symbol
precedes safety instructions. Failure to follow these instructions may result in injury
to the rider or to others, or damage to the product.
All wheeled vehicles will provide safe, enjoyable transportation and recreation when
used and maintained properly. Like bicycling, skateboarding, and in-line skating,
riding can be dangerous even under the best of circumstances. We do not want you
to get hurt. Please follow all safety rules and operating instructions.
This toy should be used with caution since skill is required to avoid falls or collisions
causing injury to the user or third parties.
WARNING:
• Adult assembly is required.
• Continuous adult supervision is required.
• Product does not have a brake - operator back pedals to slow or stop.
• Ensure rider can reach the pedals through full range of motion.
• Always wear a CPSC approved helmet while riding, with the chinstrap se-
curely fastened.
• Always wear shoes when riding.
• Ride on smooth paved surfaces. Do not ride on streets or roadways.
• Always comply with local laws and regulations.
• Never use near motor vehicles.
• Do not ride on hills, steeply sloped areas, on or near steps, near swimming
pools, or in alleys.
• Do not ride the product at dusk, at night or at times of limited visibility.
• Do not ride off road, on grass or wet surfaces.
• Do not ride the product over curbs or bumps that can damage the steering
mechanism.
• Do not ride the product without the fl ag installed.
• Do not wear headphones or anything else that would impair your ability to
hear or see.
• Do not jump or ramp product.
• Do not tow the product.
• Do not pull any objects with the product.
• Do not push the product.
• Never ride with more than one person. Maximum weight is 80 lbs (36Kg).
• This product should only be used by persons 5+ years of age.
• Excessive weight may cause a hazardous or unstable condition.
• Replace worn or broken parts immediately.
• If anything does not operate properly, discontinue use.
WARNING Continued:
• Understand all operating procedures before riding.
• Do not add a motor to the product.
• Do not modify the product.
• Before each ride check all screws and fasteners; re-tighten any that are loose.
Replace any fasteners that are damaged.
• Know your limits. Be familiar with your abilities. Use common sense.
Assembly Notes
Tools necessary for assembly:
Phillips screwdriver
The instructions in this manual refer to the right and left side of the product, these
are defi ned from the rider position.
Do not discard any parts until the unit is completely assembled.
WARNING:
Wheels & Axle:
• The wingnuts must be securely tightened to ensure rear wheels do not come
loose from the axle.
• All hardware must be suffi ciently tightened to ensure it does not come loose.
Pivot Bolt:
Pivot hardware must be correctly installed to ensure they do not come loose.
Steering Function:
• Over tightening the steering linkage may prevent the steering from operating
properly.
• Pulling back on the right lever, and pushing forward on the left lever will turn
the product towards the right.
• Pulling back on the left lever, and pushing forward on the right lever will turn
the product towards the left.
• Steering this product takes some practice. Ensure the rider can properly steer
the product. Practice in an open area.
Seat:
Secure the seat bolt each time the seat is moved.
Flag:
The fl ag is provided to make the rider and the product more visible. Do not use the
product without the fl ag installed.