Table of Contents
Advertisement
24
Introduction
TV back panel controls and connections
❖
The mode of the VOL +/– buttons change in the following order
each time the button is pressed:
→ Channel → Input → Volume →
Back panel connections
4
LAN IN—Connects the TV to your home network.
5
HDMI
digital audio and uncompressed digital video from an HDMI
device. HDMI
6
Analog Audio Out—Analog audio outputs for connecting an audio
amplifier.
7
PC IN—For use when connecting a personal computer.
8
ANT/CABLE—Antenna input that supports analog (NTSC) and
digital (ATSC) off-air antenna signals and analog and digital Cable
TV (QAM) signals.
9
ColorStream
V connections, see
ColorStream™ or a VCR with composite video" on page
10
PC Audio IN—Connect this to output audio from the PC connected
to the PC IN terminal.
11
IR Blaster OUT—Used to connect and control infrared remote-
controlled devices.
NOTE
In Source mode, the arrow buttons toggle the input from one
source to the next.
®
IN—High-Definition Multimedia Interface input receives
®
connection is necessary to receive 1080p signals.
™
HD/ Video 2 IN—These include standard A/
Component/Standard (composite) video cables carry only video
information; separate audio cables are required.
"Connecting a Blu-ray™/DVD player with
®
30.
Advertisement
Table of Contents
