Table of Contents
Advertisement
4
Select Next and press the OK button.
5
Read the information on screen, and select Agree after confirming
the contents. Then select Next and press the OK button.
6
To set Favorite Channels, select Yes and press the OK button.
7
Register a channel.
Up to 10 channels can be set for Antenna/Cable and external
❖
input devices.
To register an Antenna/Cable channel:
1
Press the p / q (arrow) buttons to select a channel.
2
Press the OK button and the channel marked with
set in Favorite Channels.
To register a channel received through an external input device:
1
Press the t / u (arrow) buttons to change the input.
2
Press the YELLOW button.
3
Use the number buttons (0-9) to enter the Channel number to
register, then press the OK button.
4
When the focus has moved to the Channel Name, press the
OK button.
5
When the software keyboard appears, enter the Channel
Name.
For how to use the software keyboard, refer to
software keyboard" on page
To change registered channels, refer to
❖
Channel contents" on page 133.
8
When you have finished setting channels, press the GREEN button.
The current time screen appears.
9
Select Next and press the OK button.
If you are not connected to a network, select a channel to obtain
time information and press the OK button.
10
Select Done and press the OK button.
The Flip Bar setup is complete.
NOTE
❖
❖
If some channels are already registered, press the q
❖
(arrow) button to move the focus to the empty space at
the bottom.
To set a channel from an external input, first set the IR Blaster settings.
If you delete a device from IR Blaster Setup, any Favorite Channels
registered from that device will also be deleted.
Advanced features
Using the Flip Bar features
125.
131
will be
3
"Using the
"Changing the Favorite
Advertisement
Table of Contents
