Table of Contents
Advertisement
122
Advanced features
Setting up the Network
3
Press the p / q (arrow) buttons to select IP Address Setup, and
then press the OK button.
4
Press the p / q (arrow) buttons to select Auto Setup and press the
OK button.
5
Press the p / q (arrow) buttons to select Off.
6
Press the p / q (arrow) buttons to select IP Address.
7
Press the t / u (arrow) buttons to select the IP Address field and
use the 0-9 buttons to enter in a digit. Press the u (arrow) button
to select the subsequent fields. To save the setting, select Done and
press the OK button.
NOTE
8
Press the p / q (arrow) buttons to highlight Subnet Mask, and edit
in the same way as IP Address.
9
Press the p / q (arrow) buttons to highlight Default Gateway, and
edit in the same way as IP Address.
NOTE
DNS Setup
NOTE
Auto setup:
1
Press the MENU button.
2
Select Network > Network Setup > Advanced Network Setup
and press the OK button.
3
Press the p / q (arrow) buttons to select DNS Setup, and then press
the OK button.
IP address field numbers must be between 0 and 255. If you input an
incompatible number and press the OK button, a warning message will
appear.
If you manually set the IP address, you must not use the same IP address
with any other device. The IP address you use should be a private address.
If you do not know the correct values to use, contact your network
administrator or Internet Service Provider.
When the DHCP function of the router connected to this TV is Off, set
❖
Auto Setup to Off, and manually set the DNS address(es).
Your Internet Service Provider should have provided these to you.
The settings in Auto Setup are linked to those selected in the IP
❖
Address Setup menu. If Auto Setup is set to On, then Auto Setup
in the IP Address Setup menu will also be set to On.
Advertisement
Table of Contents
