DrIvEr CONTrOL FEATUrES
POWEr OUTSIDE rEArvIEW MIrrOrS
The switch is located on the driver's
armrest and can be used to adjust both the
left and right outside mirrors.
TO ADjUST THE POSITION OF EITHEr MIrrOr:
1.
Move the selecting switch to the
R (right) or L (left) to adjust the
corresponding mirror.
2.
Adjust the mirror angle by depressing
the appropriate direction on the
perimeter switch.
3.
Move the selecting switch back to the
middle position to deactivate the
perimeter switch.
FUEL FILLEr DOOr rELEASE
rEFUELING
1.
Pull fuel release lever.
2.
Remove fuel cap.
3.
Pump fuel.
4.
Replace fuel cap.
5.
Close fuel door.
NOTE: After adding fuel, always reinstall
the fuel cap fully and make sure it
clicks at least three times. Failure to
do this may result in the Check Engine
light illuminating.
4
HOOD rELEASE
To unlatch the hood, pull the release
lever. The hood should pop up slightly.
HEADLIGHTS
HEADLIGHT SWITCH
To operate the headlights, twist the
switch on the end of the lever:
OFF –
Headlights off
–
Parking lights on
–
Headlights on
NOTE: The ignition must be in the
ON position to turn on the headlights.
High Beam Activation:
Push the lever
forward.
Flash Feature:
Pull the lever toward you
and release.
5