Bframe No; I Playback Volume; J Lcd Brightness; Lcd Power Save - FujiFilm FINEPIX S9400W Series Basic Manual

B FRAME NO. B
FRAME NO.
New pictures are stored in
image files named using a
four-digit file number as-
signed by adding one to the
last file number used. The
file number is displayed dur-
ing playback as shown at right. B
controls whether file numbering is reset to 0001
when a new memory card is inserted or the cur-
rent memory card is formatted.
• CONTINUOUS: Numbering continues from the last
file number used or the first available file num-
ber, whichever is higher. Choose this option to
reduce the number of pictures with duplicate
file names.
• RENEW: Numbering is reset to 0001 after format-
ting or when a new memory card is inserted.
1
• If the frame number reaches 999-9999, the shutter
release will be disabled (P 119).
• Selecting R RESET (P 97) resets B FRAME NO. to
CONTINUOUS but does not reset frame numbering.
• Frame numbers for pictures taken with other cam-
eras may differ.
102

I PLAYBACK VOLUME

I
Press the selector up or down to choose volume
Frame number
for movie playback and press MENU/OK to select.
100-0001 100-0001
J

J LCD BRIGHTNESS

Directory File
Press the selector up or down to choose display
number number
brightness and press MENU/OK to select.
B FRAME NO.
Choose whether to save power to increase bat-
tery life. This option does not take effect during
playback or recording movies.
U POWER SAVE ON U
U POWER SAVE OFF U
PLAYBACK VOLUME
LCD BRIGHTNESS

LCD POWER SAVE

LCD POWER SAVE
Option Option
The display dims to save power if no
operations are performed for a few
POWER SAVE ON seconds. Normal brightness can be re-
stored by pressing the shutter button
halfway.
POWER SAVE OFF Automatic dimming off.
The Setup Menu
Description Description