Bframe No; Goperation Vol; H Shutter Volume - FujiFilm FinePix AX300 Series Owner's Manual

The Setup Menu
B FRAME NO. B
FRAME NO.
New pictures are stored in image fi les named using a four-digit fi le
number assigned by adding one to the last fi le number used. The fi le
number is displayed during playback as shown at right. B FRAME NO.
controls whether fi le numbering is reset to 0001 when a new memory
card is inserted or the current memory card is formatted.
Option Option
Numbering continues from the last fi le number used or the fi rst available fi le
CONTINUOUS CONTINUOUS number, whichever is higher. Choose this option to reduce the number of
pictures with duplicate fi le names.
Numbering is reset to 0001 after formatting or when a new memory card is
RENEW RENEW
inserted.
R R If the frame number reaches 999-9999, the shutter release will be disabled (
If the frame number reaches 999-9999, the shutter release will be disabled (P 85).
R R Selecting Selecting R R RESET RESET ( (P 67) sets
number. number.
R R Frame numbers for pictures taken with other cameras may diff er. Frame numbers for pictures taken with other cameras may diff er.
G OPERATION VOL. G OPERATION VOL.
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF
(mute) to disable control sounds.

H SHUTTER VOLUME

H SHUTTER VOLUME
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute)
to disable the shutter sound.
68
Description Description
67) sets B B FRAME NO. to to CONTINUOUS FRAME NO.
Directory
number
CONTINUOUS but does not reset the fi le but does not reset the fi le
( ( defaults to defaults to CONT.) CONT.)
Frame number
100-0001 100-0001
File
number
85).
defaults to c c ) )
( ( defaults to
defaults to c c ) )
( ( defaults to
Menus