Part Names And Functions; Wireless Remote Controller - Mitsubishi Electric Mr.Slim PKA-RP50FAL2 Service Manual

4

PART NAMES AND FUNCTIONS

Indoor Unit
Air intake
Room air is suctioned
in here.
Guide vane
Air flow can be changed to horizontally
by moving the Guide vane to the left or
right.

Wireless remote controller

When cover is open.
display
OPERATION MODE display
Operation mode display indicates which
operation mode is in effect.
display
The vertical direction of air flow is indicated.
display
FAN SPEED display indicates which fan
speed has been selected.
ON/OFF button
The unit is turned ON and OFF alternately
each time the button is pressed.
FAN SPEED SELECT button
Used to change the fan speed.
MODE SELECT button
Used to switch the operation mode between
cooling, drying,heating and auto mode.
CHECK-TEST RUN button
Only press this button to perform an inspection
check or test operation.
Do not use it for normal operation.
VANE CONTROL button
Used to change the air flow direction.
Filter
(Removes dust and dirt from the intake air.)
Air outlet
CHECK TEST RUN display
CHECK&TEST RUN display indicates that
the unit is being checked or test-run.
MODEL SELECT display
Blinks when model is selected.
CHECK TEST RUN
MODEL SELECT
NOT AVAILABLE
ON/OFF TEMP
FAN
MODE VANE
CHECK LOUVER
TEST RUN
SET RESET CLOCK
7 7
Air intake grille
Swing louvers
Disperses airflow up and
down as well as adjusts the
angle of air flow direction.
Air outlet
Lights up while transmission to the indoor
unit is mode using switches.
SET TEMP.
temperature set.
Displays the current time.
Displays when in timer operation or when
°C
setting timer.
AMPM
AMPM
Displays the order of timer operation.
Displays whether timer is on or off.
SET TEMPERATURE button sets any desired
room temperature.
AUTO STOP
AUTO START TIMER CONTROL buttons
AUTO STOP (OFF timer): when this switch
is set, the
h
automatically stopped at the preset time.
AUTO START (ON timer): when this switch is
min
set, the air conditioner will be automatically
Buttons used to set the "hour and minute" of
the current time and timer settings.
Changes left / right airflow direction.
(Not available for this model)
Indicator lamp section
display
display
display indicates desired
CLOCK display
TIMER display
" " " " display
" " " " display
button
air conditioner will
started at the preset time.
h and min buttons
LOUVER button
CLOCK button
RESET button
SET button
be