Honda 2007 TSX Owner's Manual page 110

Multi-Information Display
Position Setup
If ''MEMORY POSITION LINK'' is
''ON,'' the driver's seat moves to the
position stored in the memory when
you open the driver's door, using the
remote transmitter.
Refer to page 142 for setting the seat
position memory. Also refer to page
132 for remote transmitter use.
104
Memory Position Link
While the multi-information display
shows ''POSITION SETUP,'' press
the SEL/RESET button on the
steering wheel. The display changes
to ''MEMORY POSITION LINK'' as
shown above.
Press the SEL/RESET button. The
display changes as shown above.
Select ''ON'' or ''OFF '' by pressing
the INFO button, and enter your
selection by pressing the SEL/
RESET button.