Honda 2007 TSX Owner's Manual page 69

U.S. Canada
Parking Brake and Brake System
Indicator
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the rear
brakes, axles, and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on
the multi-information display (see
page 78 ).
2. If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. You will also see a
''BRAKE FLUID LOW'' or
''CHECK BRAKE SYSTEM''
message on the multi-information
display (see pages 79 , 84 ). For
more information, see page
Lights On Indicator
This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or position. If you turn the
ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning off the light switch, this
indicator will remain on. A reminder
chime will also sound when you open
the driver's door and remove the key
from the ignition switch.
Instrument Panel Indicators
Supplemental Restraint
System (SRS) Indicator
This indicator comes on for several
seconds when you turn the ignition
switch to the ON (II) position. If it
comes on at any other time, it
indicates a potential problem with
your front airbags. This indicator will
also alert you to a potential problem
with your side airbags, passenger's
334 . side airbag automatic cutoff system,
automatic seat belt tensioners, side
curtain airbags, driver's seat position
sensor, or the front passenger's
weight sensors. You will also see a
''CHECK AIRBAG SYSTEM''
message on the multi-information
display (see page 83
information, see page
). For more
32 .
63