Table of Contents
Advertisement
GUIDE
CENTER SHOULDER BELT
When storing cargo, you can move
the rear center shoulder belt out of
the way by removing the belt from
the guide.
RELEASE LOOP
To release the seat-back from inside
the trunk, pull the release loop under
the trunk panel.
Push the seat-back down, then let go
of the release.
To lock the seat-back upright, push it
firmly against the trunk panel. Make
sure it is latched in place by pulling
on the top of the seat.
Make sure that the folded seat-back
does not interfere with the front
passenger's seat-back. This will
cause the front passenger's weight
sensors to work improperly (see
page
28
). Also check the passenger
airbag off indicator to assure proper
operation of the passenger's
advanced front airbag.
Make sure all rear shoulder belts are
positioned in front of the rear seat-
back, and the center shoulder belt is
re-positioned in the guide whenever
the seat-back is in its upright position.
Be sure there are no twists in the
center shoulder belt.
CONTINUED
Seats
141
Advertisement
Chapters
Table of Contents
