Table of Contents
Advertisement
Cleaning
•
Disconnect the power supply before cleaning.
•
Keep the machine and key sheet free of dust and dirt.
•
Ensure that all spills are wiped clean, especially on the weigh platter.
•
Do not put components in dishwasher.
•
Dilute detergent per suppliers instruction.
•
Do not hose down or pressure wash any part of the scale.
•
Never use a scrubber pad, steel wool, or abrasive material to clean the scale.
•
Clean the scale with a mild detergent and warm water solution.
•
Do not allow moisture to get into the load cell mounted under the scale weigh platter. Water damage is not
covered under the limited warranty.
•
When cleaning the scale, only use a soft damp cloth with a mild cleaner. Never use volatile or caustic liquids.
Cleaning the Print Head
1. Dip a cotton swab into the thermal print head cleaning solution
provided with the scale. Isopropyl rubbing alcohol can also be
used.
2. Rub the cotton swab on the print head until the debris is removed.
3. Allow the alcohol to air dry.
DO NOT use a cloth or other material to dry the
print head. This can possibly damage the print head.
NEVER use sharp objects to remove any labels that may have stuck to the print head.
Maintenance
It is recommended that the following steps be performed on a daily basis.
1. Ensure that there is a sufficient amount of labels remaining in the machine.
2. Clean the thermal head with a cotton swab and isopropyl rubbing alcohol only.
Cleaning/Maintenance
Thermal Print Head
Page 17
Hide quick links:
Advertisement
Table of Contents
