Averages, Highest Value And Lowest Value For 7, 14 And 30 Days - Accu-Chek Compact Plus Reference Manual

Press the S button to move towards the next most recent result

saved.
If you hold down the S button, you scroll through your results more
quickly towards the more recent results. When you reach the most
recent result in memory, pressing the S button again takes you back to
the oldest result.
Memory Location 1
most recent result
M
Memory Location 2
M
Memory Location 3
M
M
Memory Location 300
oldest result
88
S
S
Memory Location 298
S
Memory Location 299
S
Using your meter as an electronic notebook
Press the Test button to turn the meter off. A test strip is not ad-

vanced.
5.3 Averages, highest value and lowest value for 7, 14 and 30
days
Your meter can display the average value as well as the highest value
and the lowest value. You can produce these statistics for the last 7, 14
or 30 days. The current day is always included. If more than 300 test
results were saved during this period, the statistics will be based on the
last 300.
If, for example, results have only been saved for the last 5 days,
i
these results will be used to calculate the averages for 7,14 and
30 days.
Results flagged as quality controls as well as results shown as
i
being LO or HI are not included in the calculations.
The meter can only calculate these statistics as long as the
i
results are stored together with the time and date. If you have
not entered the time and date, three horizontal bars – – – are
displayed instead of the numerical values.
Using your meter as an electronic notebook
5
89