Keyless Go - Chrysler 300 includes srt8 2010 User Manual

KEYLESS GO™

Stopping
• Place the shift lever in PARK.
• Press the ENGINE START/STOP button once. The ignition switch will return to the
OFF position.
• If the shift lever is not in PARK, the ENGINE START/STOP button must be held for
two seconds and vehicle speed must be above 5 mph (8 km/h) before the engine
will shut off.
NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position
and the transmission is in PARK, the system will automatically time out after
60 minutes of inactivity and the ignition will switch to the OFF position.
Keyless Go™ Functions
NOTE: The following functions are with the driver's foot OFF the Brake Pedal
(Transmission in PARK or NEUTRAL Position).
Starting With The Ignition Switch In The OFF Position:
• Press the ENGINE START/STOP button once to change the ignition switch to the
ACC position.
• Press the ENGINE START/STOP button a second time to change the ignition switch
to the RUN position.
• Press the ENGINE START/STOP button a third time to return the ignition switch to
the OFF position.
ACC
Press
OFF
Press
GETTING STARTED
Engine Starting/Stopping
Starting
• Place the shift lever in PARK or NEUTRAL.
• While pressing the brake pedal, press the
• To stop the cranking of the engine prior to
Press
RUN
ENGINE START/STOP button once. If the
engine fails to start, the starter will
disengage automatically after 10 seconds.
the engine starting, press the button again.
11