HTC Smart Phone User Manual page 77

8. After you click Menu > Start on the Wireless Modem screen of your
phone, the Found New Hardware dialog box will then appear on
Windows on your notebook and will show that your phone has been
detected as an infrared modem. In this dialog box, make sure that
Install the software automatically (Recommended) is selected
then click Next.
9. Wait for Windows to finish installing the infrared modem, then click
Finish.
Note Press Done to exit the Wireless Modem. This will also cut the connection
between your phone and computer.
To set up the phone as a USB modem
1. On the Home screen of your phone, click Start > Accessories >
Wireless Modem.
2. Select USB as the Connection type.
3. To use your phone as a GPRS modem, set the Access point name
(APN). To set, click Menu > APN Setting.
4. On your notebook, disable ActiveSync then plug in the USB cable
adapter between the phone and the notebook.
Note To disable ActiveSync on your computer, click File > Connection Settings
then clear Allow USB connections.
5. Click Menu > Start on your phone.
6.
The next thing to do is to add the phone as a USB modem onto your
notebook. To do so, continue on with the following steps.
7. After you click Menu > Start on the Wireless Modem screen of your
phone, your notebook will automatically detect that your phone
has been connected. The Found New Hardware dialog box will then
appear on your notebook.
8. In the Found New Hardware dialog box, select Install from a list or
specific location (Advanced) and click Next.
9. Select Search for the best drivers in these locations.
Getting Connected 77