Trouble Shooting - ABS ABSFBM-50 Owner's Manual

Fault
The mixer does not
operate /start.
The mixer starts and
then immediately
stops.
The mixer labors under
load.
The mixer moves or
rocks during operation.
Excessive flour dust
coming from mixer.
The mixer bowl and
dough hook operate in
the wrong direction.
Possible Cause
Not plugged into the
socket at main switch.
The main switch is "off".
The bowl safety guard is
open.
The mixer overload has
been activated.
Stop button is still locked
in the down position.
Both high and low speed
timers are set to zero.
The mixer overload has
been activated.
Fuse overload at the
power board.
Dough too stiff / tight.
Machine malfunction.
Floor not level or the
adjustable feet
located incorrectly.
First speed timer set too
short.
Inserting the mixer plug
into the incorrect socket
after cleaning.
Relocating the mixer in
another position
maintenance.
10

TROUBLE SHOOTING

Remedy
Plug in and switch
on.
Turn on.
Place it
position.
Contact supervisor /
service agent.
Release by rotating
and pulling.
Reset mix cycle on
both timers.
Contact supervisor /
service agent.
Contact supervisor /
service agent.
Review and adjust
dough consistency;
add more liquid.
Contact supervisor /
Service agent.
Re-adjust level and
are stabilize
adjustable foot.
Extend first speed
mix / blending cycle.
Return to correct
position.
Consult authorized
after electrical service to
rewire plug.
down
with