Trouble Shooting - ABS ABSFBM-200T Owner's Manual

Fault
The mixer does not
operate /start.
The mixer starts and
then stops.
The mixer labors under
load. Belts screech.
The mixer moves or
rocks during operation.
Excessive flour dust
coming from mixer.
The mixer bowl and
dough hook operate in
the wrong direction.
Possible Cause
Not plugged in.
The main switch is "off".
The bowl safety cover is
open.
The mixer overload has
been tripped.
Stop button is still locked
in the down position.
Both high and low speed
timers are set to zero.
The mixer overload has
been activated.
Fuse blown internally.
Dough too stiff / tight.
Machine malfunction.
Floor not level or the
adjustable feet
located incorrectly.
First speed timer set too
short.
Mixer is plugged into a
new electrical socket
after cleaning or moved
in bakery. Polarity of 3
phase plug reversed.
10

TROUBLE SHOOTING

Remedy
Plug in and switch
on.
Turn the switch on.
Place it
position.
Contact supervisor /
service agent.
Release by rotating
and pulling out.
Set mixing time on
both timers.
Contact supervisor /
service agent.
Contact supervisor /
service agent.
Review and adjust
dough consistency,
eg. Add more liquid.
Contact supervisor /
Service agent.
Readjust level and
are stabilize by means
of adjustable foot.
Extend first speed
mix / blending cycle.
Return to original
position in bakery.
Consult authorized
electrical service to
rewire plug; swap
white and
wires in plug.
down
black