Hitachi RAS-S18CDT Instruction Manual page 5

OPERATION INDICATOR
INDOOR UNIT INDICATORS
EN1 RAS-RAC-S18CDT 5 EN1 RAS-RAC-S18CDT 5
TEMPORARY SWITCH
Use this switch to start and stop when the remote
controller does not work. [Use non-conductor stick
(example toothpick)]
By pressing the temporary switch, the operation is
●
done in previously set operation mode.
When the operation is done using the temporary
●
switch after the power source is turned off and turn
on again, the operation is done in automatic mode.
TIMER LAMP
This lamp lights when the timer is working.
OPERATION LAMP
This lamp lights during operation.
FILTER LAMP
When the device is operated for a total of about 200
hours, the FILTER lamp lights to indicate that it is
time to clean the fi lter. The lamp goes out when the
" (AUTO SWING)" button is pressed while the
device is on "STANDBY MODE".
– 5 –
1/6/14 4:25 PM 1/6/14 4:25 PM