CIRCULATION OPERATION
■ Circulation Function
●
During circulation operation, compressor will not be running and there is no cooling operation with only
indoor fan running.
●
When the setting temperature is higher than room temperature, indoor fan will stop running.
EN2 RAS-RAC-S18CDT 10
EN2 RAS-RAC-S18CDT 10
Press the
button so that the display indicates
1
(CIRCULATE).
Circulating operation starts with a beep.
2
Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).
Press the temperature control button to set to the desired
3
temperature.
Press the
(STOP) button to stop operation.
STOP
■ As the settings are stored in memory in the remote controller,
you only have to press the
– 10 –
(CIRCULATION) button next time.
1/6/14 4:54 PM
1/6/14 4:54 PM