Troubleshooting; Technical Parameters - SPT IM-101 Instruction Manual

TROUBLESHOOTING

PROBLEM
" " symbol is flashing
" " symbol is displayed
" " symbol is displayed
" " symbol flashes for 20
seconds
Ice cubes stick together.
Ice making cycle is normal
but no ice is made.

TECHNICAL PARAMETERS

MODEL
PROTECTION TYPE
POWER
CURRENT
REFRIGERANT
NET WEIGHT
SIZE
POSSIBLE CAUSE
Lack of Water
Ice basket is full
Ice shovel cannot rotate.
Ice-full detecting sensor is
faulty
The ice making cycle is too
long
Water temperature in
reservoir is too low
Ambient temperature or
water temperature in
reservoir is too high.
Refrigerant liquid leakage.
Pipe in the cooling system is
blocked.
10
SOLUTION
Stop the ice maker and fill water
Remove ice from ice basket
Check if ice-cubes are blocking the
ice-shovel. Otherwise, contact
Sunpentown
Please contact Sunpentown
Stop the ice maker and restart after
the ice blocks melt. Select the small
ice size
Change the water in the reservoir.
Use water between 45°F ~ 90°F
Ambient temperature should be
below 90°F and use colder water
Contact Sunpentown
Contact Sunpentown
IM-101
I
115V / 60Hz
2.4 ~ 3.5A
R134a / 130g
45 lbs
17.15 x 15 x 17 inches