Timer Setting Procedure - SPT IM-101 Instruction Manual

TIMER SETTING PROCEDURE

How to set ON-TIMER program
When the unit is off, you can set the unit to start in
1. Press the TIMER button on the control panel. Timer indicator,
Set window.
2. Press the SELECT button to change the timer delay to your desired number of hours, from
1.0 to 18 hours, and back to 0.5, 1.0 hours.
3. A few seconds after releasing the buttons, the time digit will display the set time invariably.
This means the TIMER has been set. With time passed, the digit will decrease by 0.1 hour.
4. When the digit decreases to zero and disappears, the unit will start to run automatically
according to your settings.
To cancel
To cancel ON-TIMER, press the TIMER button twice.
How to set OFF-TIMER program
When the unit is on, you can set the unit to stop in
1. Press the TIMER button on the control panel. Timer indicator,
Set window.
2. Press the SELECT button to change the timer delay to your desired number of hours, from
1.0 to 18 hours, and back to 0.5, 1.0
3. A few seconds after releasing the buttons, the time digit will display the set time invariably.
This means the TIMER has been set. With time passed, the digit will decrease by 0.1Hr.
4. When the digit decreases to zero and disappears, the unit will stop running automatically.
To Cancel
To cancel OFF-TIMER, press the TIMER button twice.
x number of hours:
Each press is an increment of 0.5 hours.
x number of hours:
hours. Each press is an increment of 0.5 hours.
9
will flash in the Timer
will flash in the Timer