Konica Minolta bizhub 163 User Manual page 311

When a message appears
Message
UPPER TRAY FULL
REMOVE PAPER
(PRESS ANY KEY)
TRAY MOVEMENT ERROR
(PRESS ANY KEY)
MAINTENANCE CALL (M1)
MAINTENANCE CALL (M2)
SET PLUG-IN COUNTER
MACHINE TROUBLE
SERVICE CALL (C####)
bizhub 163/211
Cause
If the optional job separator is
installed and the paper in the
upper output tray has reached
the maximum capacity, copy-
ing/printing cannot continue.
The optional job separator is in-
stalled and the paper in either
the upper output tray or the
lower output tray of the job
separator has reached the
maximum capacity when the
machine is turned on or when
copying/printing begins.
A maintenance is due.
The PC drum unit should be re-
placed.
A counter key is not inserted.
Some problem occurred in the
machine.
Remedy
Remove all paper from the up-
per output tray of the job sepa-
rator.
Remove all paper from the up-
per output tray and lower out-
put tray of the job separator,
and then press any control
panel key.
Contact your service repre-
sentative.
Contact your service repre-
sentative.
Insert the counter key.
Turn the machine off, then on
again. If the error is still dis-
played, contact your service
representative.
8
8-23