10. Remove the small center cap and position the alumi-
num road wheel behind rear bumper with the "beauty
side" facing rearward.
"Beauty Side"
11. Insert the two long tubes on the plastic protective
plate in the lug holes of the road wheel. Push the end of
WHAT TO DO IN EMERGENCIES 551
the winch's cable, spring, steel sleeve and stamped cone
shape wheel plate though the road wheel and protective
plate.
Installing Winch
12. Slide the road wheel on the ground using the protec-
tive plate until it is directly under the winch and between
the rear bumper and exhaust system heat shields. Raise
6