Keyless Enter-N-Go Display - If Equipped; Messages; Turn Menu Off; Compass / Temperature Display - Dodge Durango 2012 Owner's Manual

Hide thumbs Also See for Durango 2012:

Table of Contents

310 UNDERSTANDING YOUR INSTRUMENT PANEL

EVIC, odometer, and navigation system (if equipped) can

be changed between English and Metric units of mea-

sure. To make your selection, press and release the

SELECT button the selected setting will be displayed.

Keyless Enter-N-Go Display — If Equipped

When the ENGINE START/STOP button is pressed to

change ignition switch positions, the Keyless Enter-N-Go

icon momentarily appears in the lower right corner of the

EVIC display showing the new ignition switch position.

Refer to "Keyless Enter-N-Go" in "Starting And Operat-

ing" for more information.

NOTE: Under certain conditions, the display may be

superseded by another display of higher priority. But

when the ignition switch position is changed, the display

always re-appears.

Select from Main Menu using the UP or DOWN buttons.

This feature shows the number of stored warning mes-

sages (in the # place holder). Pressing the SELECT button

will allow you to see what the stored messages are. Press

and release the UP and DOWN buttons if there is more

than one message to step through the remaining stored

messages. Pressing the BACK button takes you back to

the Main Menu.

Select from Main Menu using the DOWN button. Press-

ing the SELECT button blanks the menu display. Pressing

any one of the four steering wheel buttons brings the

The compass readings indicate the direction the vehicle is

facing. The EVIC will display one of eight compass

readings and the outside temperature.

Chapters

Table of Contents