Panasonic WV-NM100 Operating Instructions Manual page 66

ADVANCED SETTINGS
Setting items
"Community name"
Enter the name of the community to be monitored.
This name must be coincident with the community
name of SNMP.
Characters for "Community name"
Up to 32 characters (ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
#$%'()=~|`{}<>?_-^[]/@*,.:;+\)
Default setting for "Community name": public
"Equipment name"
Enter the same name as "Camera name" on the
"Basic Setup" page. (Refer to page 31.)
Characters for "Equipment name"
Up to 32 characters (ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
#$%'()=~|`{}<>?_-^[]/@*,.:;+\)
Default setting for "Equipment name"
WV-NM100
Note
To ensure security, change the default community
name "public" on the "SNMP" page regardless of the
SNMP is used or not.
When changing the community name on the "SNMP"
page, change also the community name of the SNMP
manager to match the newly entered name.
66
"Location"
Enter the name of the location where the camera is
installed.
Characters for "Location"
Up to 32 characters (ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
#$%'()=~|`{}<>?_-^[]/@*,.:;+\)
Default setting for "Location"
Nothing is entered for this parameter.
"Contact"
Enter the mail address or telephone number of the
administrator of the server.
Characters for "Contact"
Up to 255 characters (ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
#$%'()=~|`{}<>?_-^[]/@*,.:;+\)
Default setting for "Contact"
Nothing is entered for this parameter.