Panasonic WV-NM100 Operating Instructions Manual page 26

SETUP
Screenshot 6
The "Network" page appears.
Note
• About the address translation function (Static IP masquerade, Network Address Translation (NAT))
The address translation function changes a global IP address to a private IP address, and "Static IP masquer-
ade" and "Network Address Translation (NAT)" have this function. This function is to be set in a router.
To browse camera pictures via the Internet by connecting the camera to a broadband router, it is necessary to
assign a respective port number for each camera and address translation by using the address translation func-
tion. For further information, refer to the operating instructions of the broadband router.
Enter [Global IP address + : (colon) + port number]
in the "Address" box of the browser via the Internet.
vvv.xxx.yyy.zzz:82
vvv.xxx.yyy.zzz:81
Internet
(WAN)
26
Broadband router
Global address
for the WAN
vvv.xxx.yyy.zzz
Cable modem or
xDSL modem
STEP6
Set parameters for each item in the "Network"
page.
The parameters differ depending on the connec-
tion type (refer to pages 12-14).
For further information, refer to the next page.
STEP7
Click the [SET] button after completing the
setup.
! Important
After you click the [SET] button, the
"Command Executing" message appears.
(This message will appear even when you
click the [SET] button in other windows.) Avoid
doing any operation while the message is dis-
played.
Private address
for the LAN
192.168.0.254
Address translation
vvv.xxx.yyy.zzz:82 → 192.168.0.2:82
Address translation
vvv.xxx.yyy.zzz:81 → 192.168.0.1:81
Private address
192.168.0.2
Port number: 82
Private address
192.168.0.1
Port number: 81