Panasonic WV-NM100 Operating Instructions Manual page 61

Screenshot 3
The "Host authentication" page appears.
Screenshot 4
The "User authentication" page appears.
61
STEP3
Click the [User authentication] tab.
STEP4
Begin the setting for the user authentication.
"User authentication"
Select "ON" or "OFF" to set whether to authenti-
cate users or not.
"User name"
Enter a user name of up to 32 characters.
"Password" / "Retype Password"
Enter a password for the user of at least 8 and
no more than 32 characters.
"Access level"
Select an access level from the following:
Administrator / Camera control / Live viewing
"Administrator": Authorized to operate all
functions of the camera
"Camera control": Authorized to monitor the
picture and operate on the "Alarm log list"
page and the "Control" page. Not autho-
rized to operate on the "Basic setup"
page and the "Advanced setup" page.
"Live viewing": Authorized only to monitor
the picture. Not authorized to operate the
camera.
STEP5
Click the [SET] button after completing the set-
ting.
Click the "Delete User" [o] button to check the
users registered in the user authentication. You
can delete the selected user by clicking the
[DEL] button below. Access level, which is sur-
rounded by "[ ]", will appear beside the user
name registered.
Example: admin [1]
Access level
[1]: Administrator
[2]: Camera control
[3]: Live viewing