Pix Controller DigitalEye Instruction Manual page 11

Step 4
Lock the Master Lock® Python™ Cable to the tree and
remove the key.
Step 5
Your DigitalEye™ 7.2 camera system is now firmly
locked to the tree and ready to take photos.
Checking your DigitalEye™ 7.2 Unit
When checking your DigitalEye™ 7.2 unit it's a good idea to carry a spare set of AA camera
batteries and a spare memory card for the digital camera. Approach the DigitalEye™ 7.2 unit
from the rear unless you want your photo taken. Note: when you open the DigitalEye™ 7.2 lid
a photo could be taken at this time before the unit power switch is turned off. The unit
power switch was placed inside the DigitalEye™ 7.2 unit to prevent tampering with the
unit.
Unlock the DigitalEye™ 7.2 unit (if locked) and open the lid. Next, power down the DigitalEye™
7.2 unit by turning the main power switch to the "off" position.