Remote Control; Unit Care - Panasonic SC-HTB20 Operating Instructions Manual

Home theater audio system
Hide thumbs Also See for SC-HTB20:
Table of Contents

Advertisement

Remote control

1
2
3
4
1
Turn the system on or off (
2
Adjust the dialog effect level (
3
Select the TV as the source (
4
Select the BD/DVD as the source (
5
Adjust the output level of the active
subwoofer (bass sound) (
6
Adjust the volume of the speakers (
7
Mute the sound (
8
Select the AUX as the source (

Unit care

∫ Clean the system with a soft, dry cloth
≥ When the system becomes very dirty, wring a cloth moistened in water tightly to wipe the dirt, and
then wipe it with a dry cloth.
≥ When cleaning the system, use a fine cloth. Do not use tissues or other materials (towels, etc.) that
can fall apart. Small grains may get stuck inside the speaker cover.
≥ Never use alcohol, paint thinner or benzine to clean the system.
≥ Before using chemically-treated cloth, carefully read the instructions that came with the cloth.
5
6
7
8
21)
22)
21)
21)
21)
21)
21)
21)
Remove the insulation sheet A before using.
∫ To replace a button-type battery
1 While pressing the stopper B, pull out
the battery holder.
2 Set the button-type battery with its (i)
mark facing upward and then put the
battery holder back in place.
≥ When replacing the battery, use:
CR2025 (Lithium battery)
≥ Keep the button-type battery out of reach of
children to prevent swallowing.
7
VQT4E52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents