Speaker Fall Prevention Measures - Panasonic SC-HTB20 Operating Instructions Manual

≥ Place the speaker that is connected with the speaker cable with a red connector on the observers' right, and connect
with the speaker cable with a white connector on the observers' left.

Speaker fall prevention measures

To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall or table with a fall
prevention cord (hereafter "cord").
≥ Consultation with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support is recommended (
the wall and speakers, and personal injury.
≥ Use a cord of less then ‰1.5 mm, which is capable of supporting over 10 kg.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ Make sure that the slack of the cord is minimal.
When placing the speakers on a wall
Horizontal placement
C
Vertical placement
C
A Cord (not supplied)
B Screw eye (not supplied)
16
VQT4E52
Press into the
groove.
D
Pull the cable straight
along the line and slide
into the groove.
≥ Be sure to insert the cable
in under the projecting part.
11, 13). Improper attachment may result in damage to
B
A
C
Wall-mounted speakers
B
A
C
Wall-mounted speakers
C Wall
D TV
Back of the speaker base
A
A