Additional Speaker Fall Prevention Measures - Panasonic SC-HTB550 Operating Instructions Manual

SC-HTB550_RQT9660_mst.book Page 17 Monday, January 30, 2012 4:53 PM
Connect the speaker cables.
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Insert the
wire fully.
r: White
s: Blue line
Push
Press into the groove.
≥ Place the speaker that is connected with the speaker cable with a red connector on the observers' right, and connect with
the speaker cable with a white connector on the observers' left.

Additional speaker fall prevention measures

To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall or table with a fall
prevention cord (hereafter "cord").
≥ Consultation with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support is recommended (
the wall and speakers, and personal injury.
≥ Use a cord that is capable of supporting over 10 kg (with a diameter of about 1.5 mm).
≥ Keep the screws out of reach of children to prevent swallowing.
≥ Make sure that the slack of the cord is minimal.
When attaching the speakers to a wall
Horizontal placement

Vertical placement


A Cord
Wall-mounted speakers
B Screw eye C Wall
Back of the base
11, 13). Improper attachment may result in damage to



Wall-mounted speakers



D TV


17
RQT9666