38
en | Camera set-up
6.2
Install menu
When the Install menu is opened, the MAC address of the unit
is shown. This is factory set and cannot be changed. (To ensure
that the correct MAC address is displayed, wait 20 seconds
after power-up before opening the Install menu.)
The items in the Install menu include the Mode selection, the
Lens Wizard submenu, the Network submenu, and the Defaults
submenu.
Note:
Camera parameter set-up is done via IP. See
Section 9.6 Camera for the specific camera menus.
6.2.1
Lens Wizard submenu
Item
Lens type
Detected
Set Backfocus
now
AR18-10-B006 | v1.1 | 2010.06
Selection
Auto,
Manual, DC-
iris, Video
Installation and Operation Manual
Description
Auto: - automatically selects the type of
lens.
Manual, DC-iris, Video modes: select
the matching lens type to force the
camera to the correct lens mode.
Shows the type of lens detected when
auto lens detection is used.
Select to fully open the iris. Follow the
instructions below for setting the
backfocus for your particular lens type.
After focusing the object of interest
remains in focus under bright and low
light conditions.
Dinion IP Camera
Bosch Security Systems