Rotary Commander Rm-X4S; Attaching The Label; Location Of Controls; Changing The Operative Direction - Sony WX-GT78UI Operating Instructions Manual

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how
you mount the rotary commander.
SE L
M O D E
D SP L

Location of controls

The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SEL
PRESET/
DISC
SOURCE
VOL
The following controls on the rotary commander
require a different operation from the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• PRESET/DISC control
CD/USB: The same as (ALBM/PRESET) –/+
on the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate).
• VOL (volume) control
The same as the control dial on the unit (rotate).
• SEEK/AMS control
The same as (SEEK) –/+ on the unit (rotate, or
rotate and hold).
• DSPL (display) button
To change display items.
20
D S P L
M O D E
S E L
ATT
MODE
DSPL
SEEK/AMS OFF

Changing the operative direction

The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold (SEL).
To decrease