Table of Contents
Advertisement
2-6
PC Health Status
Reset Case Open Status
Case Opened
Vcore
DDR Power
+3.3V
+12V
System Temperature
CPU Temperature
System FAN Speed
CPU FAN Speed
CPU Smart FAN Control
: Move
Enter: Select
F5: Previous Values
Reset Case Open Status
Disabled
Enabled
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) VCORE / DDR Power / +3.3V / +12V
Detect system's voltage status automatically.
System/CPU Temperature
Detect system/CPU temperature automatically.
System/CPU FAN Speed (RPM)
Detect system/CPU fan speed status automatically.
CPU Smart FAN Control
Disabled
Enabled
(Note)
Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
For more detailed information please check at the FAQ section on GIGABYTE's website.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
PC Health Status
[Disabled]
Yes
OK
OK
OK
OK
25
C/77
o
39
o
C/102
0
RPM
3183 RPM
[Disabled]
+/-/PU/PD: Value
Don't reset case open status. (Default value)
Clear case open status at next boot.
(Note)
Disable this function. (Default value)
When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements.
- 41 -
Menu Level
F
o
o
F
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup
Advertisement
Table of Contents
