Brother P-touch QL-1050 Service Manual page 106

6. Set the die cut roll of 62mm x 100mm into the machine and click the "Print
test(62mm 2Labels) (B)" button.
(Two pages are printed. 1st page: blank, 2nd page: print pattern for inspection)
7. Measure the top margin of the second page of the print result. Set the value in
the "Adjust value" column so that the top margin is 3mm±0.25mm and click the
"Apply (1)" button.
8. Click the "Print test(62mm 2Labels) (B)" button again and check the print result.
Printing direction
3mm±0.25mm
Fig. 22
20