Intelli-Time ® Clock; Set The Time, Date & Units; Backlight Settings - AcuRite 2026 Instruction Manual

Intelli-Time
®
Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you
need to do is select your Time Zone and Daylight Saving Time preferences. The
clock will then automatically set itself and change for Daylight Saving Time.
Set the Time, Date & Units
Press the " " button, located on the back of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (flashing) item, press and release the "
" " buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "
the next preference. The preference set order is as follows:
TIME ZONE ( PST MST CST EST AST HAST AKST)
DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
PRESSURE UNITS (inHg or hPa)
*If you live in an area that observes DST, DST should be set to ON, even if it is
not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
Enter setup mode at any time by pressing the "
Display Backlight Settings
This weather station's color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (30%) brightness
Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the "BACKLIGHT" button.
When display is powered with the power adapter, backlight remains on at
100% brightness. Press "BACKLIGHT" button once to dim to 60% brightness;
press again to dim to 30%, press a 3rd time to enter "AUTO DIM" mode.
AUTO DIM MODE:
MARCH 11- NOVEMBER 4
NOVEMBER 5 - MARCH 10 7:30 a.m. - 7:00 p.m.= 100% brightness
Clock
Automatically adjusts display brightness based on time of day & year.
6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 30% brightness
7:01 p.m. - 7:29 a.m. = 30% brightness
" button again to adjust
" button.
7
" or