Intelli-Time Clock; Set The Time, Date & Units; Backlight Settings - AcuRite 00806SBDI Instruction Manual

Indoor/outdoor thermometer, barometer, hygrometer
Table of Contents

Advertisement

Intelli-Time
Clock
®
Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you
need to do is select your Time Zone and Daylight Saving Time preferences. The
clock will then automatically set itself and change for Daylight Saving Time.
Set the Time, Date & Units
Press and release the "S E T " button to enter SETUP MODE. Once in setup
mode, the preference you are currently setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the "▲" or
"▼" buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "S E T " button again to adjust
the next preference. The preference set order is as follows:
LANGUAGE (English or French)
COUNTRY (USA, CAN, AUS)
AUTO DST? (YES or NO)
TIME ZONE (PST, MST, CST, EST, AST, HAT, AKT, NST, AEST, ACST, AWST)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
BAROMETRIC PRESSURE UNITS (inHg or hPa)
*If you live in an area that observes daylight saving time, DST should be set to
ON, even if it is not currently Daylight Saving Time.
You will automatically exit SETUP MODE if no buttons are pressed for 10
seconds. Enter setup mode at any time by pressing the "SET" button.
Display Backlight Settings
This weather station's color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (30%) brightness.
Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the Backlight button.
When display is powered with the power adapter, backlight remains on at
100% brightness. Press Backlight button once to dim to 60% brightness; press
again to dim to 30%, press a 3rd time to enter AUTO DIM mode.
Automatically adjusts display brightness based on time of day.
AUTO DIM MODE:
6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 30% brightness
7

Advertisement

Table of Contents
loading

Table of Contents