Download Print this page

Recording Video - Canon DIGITAL VIDEO CAMERA User Manual

Advertisement

Recording Video

4. Press the white start/stop button to begin recording.
NOTE: When recording
corner of the screen.
right corner of the screen when the camera is not
recording.
5. Press the start/stop button again to pause recording.
Restart recording by pressing the start/stop button again.
6. When finished recording, turn the POWER switch to OFF.
7. Close the LCD panel.
8. Close the lens cap.
Zooming
1. The W-T button is located on the top right side of the video camera is the wide-tele photo
switch.
2
Push the switch up to move back from the subject and make a wider shot.
3. Pull the switch down to move in closer to a subject.
School District of Manatee County
Instructional Technology Department
1. Open the lens cap by sliding the lens cap
switch to the open position.
2. Set the camcorder to CAMERA mode by
pushing in the green button while sliding
it down to the camera position.
3. Open the LCD panel. To use the
viewfinder, keep the LCD panel.
REC
will be displayed on top right
PAUSE will
be displayed on top
2

Advertisement

loading