Chime And Status Features; Voice Chime; Voice Status - First Alert FA270VKP User Manual

Chime and Status Features

Voice Chime

You can set each Keypad to announce faulted (opened) entry/exit or perimeter zones whenever
the control panel's Chime mode is on by turning on the Voice Chime mode.
Voice Chime On/Off:

Voice Status

You can use the STATUS key to announce system status and display any system and/or zone
faults (if they exist) by first turning on the Voice Chime mode (see above). When Voice Chime
mode is on, pressing the STATUS key displays and announces current system status and zone
descriptors (programmed by your installer) of faulted zones. If zone descriptors are not
programmed, the respective faulted zone numbers are announced.
To Announce Status: Press the [#] FUNCTION + [0] VOICE + [✴] STATUS key once
To Announce Faults: Press the [✴] STATUS key a second time within 10 seconds of the first
ÊK14033UGŠ
K14033UG 2/06 Rev. A
Press the [#] FUNCTION + [0] VOICE + [2] VOLUME + [4] keys.
When on, any faulted zone(s) causes a voice status annunciation, chime,
and display. When off, the sounder still provides chime when the control's
Chime mode is on.
(Voice Chime mode must be "on"; see above).
The respective system status is announced (e.g., "Disarmed Ready to
Arm" or "Disarmed Not Ready to Arm").
Note: Status cannot be announced during the Exit Delay period.
press.
Up to 3 faulted zones are announced with their zone descriptors, if
programmed. If zone descriptors are not programmed, the respective
zone numbers are announced.
149 Eileen Way, Syosset, NY 11791
www.firstalertprofessional.com
Copyright © 2006 Honeywell International Inc.