Startup And Shutdown; Basic Use Method - Promate proHarmony.2 User Manual

Start-up & Shutdown
1. Start-up headset
1)Shutdown status: Press S4 key for 2 seconds → red & blue lights flash for a
second → red light flashes once → headset tunes out a "beep,beep.." sound →
red light flashes → release S4 key → proHarmony.2 Start-up successfully,
proceed to connecting mode → automatic search has lead to pairing with
another device → connected to stereo while the blue light flashes once per
second; connected to a mono → the red light flashes once per second; at this
time connections on the stereo and mono → red & blue lights flash at the
same time - once per second; if not connected, then standby mode has been
entered, the red light flashes continuously.
2. Shutdown headset
1 Start-up status: Press S4 key for 3 seconds → red & blue lights flash quickly
once → headset tunes a "dee" sound → Shut Down.
2 proHarmony.2 automatically shuts down after a minute, if no pairing devices
have been recognized within its range.

Basic use method

1. Dial, Talk & Finish calls
After the proHarmony.2 finishes pairing with your smartphone, you can use
the headset to receive calls or enjoy the smartphone's stereo music.
2. Smartphone dial, talk and finish calls
Dial a call
Dial-up using the phone's keypad:
Using your phone, dial numbers in the same manner as usual, During
connection, headphone vibrates with ring tones. When receiving calls,
sound will be outputted automatically in the headset.
→ light flashes slowly (around 1 time/second)