Table of Contents
Advertisement
If you want to convert digital video to analog
video
Make the connection as follows:
• Connect the DV output connector of the DV unit to
the DV IN/OUT connector of the media converter
using the supplied DV connecting cable.
• Connect the input connectors of the analog video
unit to the AUDIO/VIDEO OUT connectors of the
media converter using the supplied audio/video
connecting cable.
Duplicating analog video to digital
video
You can convert and record pictures and sound from
an analog video unit to a DV unit by connecting both
units via the media converter.
1
Press POWER to turn on the media converter.
2
Press ANALOG IN.
The key indicator lights up.
3
Select the audio mode.
Each time you press and hold ANALOG IN for a
few seconds, the audio mode changes as follows.
Note
16-bit mode (high quality sound): The key
Depending on the
indicator lights up in red.
condition of the analog
12-bit mode (post sound recording): The key
video signal input to the
indicator lights up in green.
media converter, some
DV units may not output
4
Pause playback on the analog video unit slightly
the analog video signal
correctly when the digital
ahead of the point from which you want to start
video signal is output
recording.
from the media converter.
The video recorded on the
5
Pause recording on the DV unit at the point from
DV unit is not affected.
which you want to start recording.
When previewing a
recorded VIDEO ,we
6
Start playback on the analog video unit, then start
recommend connecting
recording on the DV unit.
the input connector of the
TV to the VIDEO OUT or
The picture and sound played back on the analog
S-VIDEO OUT of the
video unit are recorded on the DV unit.
media converter.
continued
10
-US
9
-US
Duplicating analog video to digital video (continued)
Duplicating digital video to analog
video
You can convert and record pictures and sound from a
DV unit to an analog video unit by connecting both
units via the media converter.
1
Press POWER to turn on the media converter.
2
Press DV IN.
The key indicator lights up.
3
Pause playback on the DV unit slightly ahead of
the point from which you want to start recording.
4
Pause recording on the analog video unit at the
point from which you want to start recording.
5
Start playback on the DV unit, then start recording
on the analog video unit.
The picture and sound played back on the DV unit
are recorded on the analog video unit.
Advertisement
Table of Contents
