Item
Monitor
Shooting image
Lens capacity
Focal length
Open aperture F No.
Peripheral light reduc-
tion
Ghost/Flare
Surface ghost
Distortion
Dust in a picture
Lens barrel
Zoom
AF
Distance measurement
operation
Shortest photograph
distance
Normal
Macro
・Inclined degree of image shall be 0.5 degree or less.
・PC monitor and print output
(Output will be evaluated while the display range boundary
of LCD unit is regarded as standard when the through-the-
monitor image is made.)
Wide-end position (Compelling∞)
7.85 mm + 7%
– 4%
Tele-end position (Compelling∞)
71.20 mm + 1%
– 7%
Wide-end position (Compelling∞)
F2.8
+ 7.8%
– 0.4%
Tele-end position (Compelling∞)
F4.2
+ 9.2%
– 2.8%
• There must not be an extreme light reduction.
• There must not be an outstanding malfunction.
• There must not be an outstanding flare at the center.
• There must not be an outstanding deformation.
• There must not be an outstanding dust in a picture.
• There must not be an abnormal action (for example, the unit
operates one-sidedly or its operation is not smooth or it is
caught).
(As changing the camera's posture, check it in all the
directions.)
• Focus must be fit in a selected area.
(Select the AF area and check it.)
The focus of AF must be fit at the following distance.
• 500mm
(Check at each zoom position.)
• Within 30mm from the protection glass surface
(Set to the "Macro" mode.)
(Check at each zoom position in the range where the "Macro"
mode display (tulip) color is changed into yellow.)
- R2 ・ E5700 -
Criteria
VAA11801-R.3578.A
Applied tool(s)
Photoshop
Printer
Focal length
Measuring
instrument
Lens drive tool
Focal length
Measuring
instrument
Lens drive tool
Visual observation
Visual observation
Visual observation
Tape measure