⑨
⑤
③
• Pass the connector ① through the hole of the back cabinet and then pull it out to
the front side of the rear cover.
• Attach the back cabinet to the front LCD unit.
• Attache the screws ② (M1.7 x 3.5).
• Attache the 2 Pieces of screws ③ (M1.7 x 4).
• Attache the 2 Pieces of screws ④ (M1.7 x 3).
• Attache the 2 Pieces of Pad ⑤ .
- A10 ・ E5700 -
⑨
• Rotate the LCD unit approx. 45 degree in
an arrow direction.
• Attach the 4 pieces of screws ⑨ (M2 x 3).
Back cabinet
④
VAA11801-R.3578.A
LCD unit
②
Connector ①