Setup As Pop3 Client - Panasonic UF-6300 Operating Instructions Manual

Setup as POP3 Client

To install your machine as POP3 Client, the following network parameters need to be programmed on your
network.
• IP Address of the DNS Server (If not available, see Note 2)
• IP Address of your machine
• Subnet Mask of your machine
• Name or IP Address of the Default SMTP mail server
• IP Address of the Default Gateway
• POP Server Name or IP Address
• POP User Account Name
• POP Password
• Email Address of your machine (See Note 1)
Email Transmission (From your machine to a PC)
Internet _ Fax@panasonic.com
popuser001@panasonic.com
Email reception (From a PC to your machine)
Internet _ Fax@panasonic.com
popuser001@panasonic.com
1. The email address format can be the same as your regular email address. If your email
NOTE
address is popuser001@panasonic.com, your machine's email address can be
Internet_Fax@panasonic.com.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names. If the DNS Server is not available, change the Fax
Parameter No. 161 (DNS SERVER) to "1:INVALID". Then the machine will prompt you to
enter the IP Address of the SMTP and POP Servers.
Pre Installation Information
Router(Gateway)
SMTP
POP3
Router(Gateway)
SMTP
POP3
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
11