Receiving Email From A Pop Server - Panasonic UF-6300 Operating Instructions Manual

Receiving Documents via LAN

Receiving Email from a POP Server

Your machine offers a choice of receiving and printing Internet email messages via LAN unattended or
proceeding manually when subscribing to a POP mail server.
Setting the POP Parameters
Set the parameters pertinent to the POP server (Fax Parameters No. 146 to 149).
No. 146 (POP TIMER): Enter the interval to check and retrieve email from the POP server (0 to 60 minutes).
If "0 minutes" is entered, the POP server is not checked for mail.
No. 147 (AUTO POP RCV): When there is mail to be retrieved from the POP server, your machine will
retrieve it and print the email unattended. If this parameter is set to "1:INVALID", the machine will not
retrieve it, but instead displays the number of mails on the POP server.
No. 148 (DELETE POP RCV EMAIL): Select whether the email is to be deleted from the POP server after it
is retrieved by your machine.
No. 149 (DELETE POP ERR EMAIL): Select whether to delete the email from the POP server when the file
attachment format is not supported.
To set the above POP parameters, follow the steps below.
1
2
3
4
5
6
60
7
4
6
1 4
Enter the desired download interval (0 to 60 minutes).
Ex:
0 5
If you make a mistake, press
and then re-enter the correct value.
for "INVALID"
1
or
for "VALID"
2
to delete the digit
Clear
SET MODE (1-8)
∨ ∧
ENTER NO. OR
FAX PARAMETER(1-177)
NO.=
146 POP TIMER
3 min. (0-60)
146 POP TIMER
5 min. (0-60)
147 AUTO POP RCV
2:VALID
147 AUTO POP RCV
2:VALID