Setup As Pop3 Client - Panasonic Panafax DX-1000 User Manual

Pre Installation Information
01007000001

Setup as POP3 Client

To install the DX-1000 as POP3 Client, the following network parameters need to be programmed on your
network.
IP Address of the DNS Server (if not available, see Note)
IP Address of the DX-1000
Subnet Mask of the DX-1000
Name or IP Address of the Default SMTP mail server
IP Address of the Default Router
POP Server Name or IP Address
POP User Account Name
POP Password
Email Address of the DX-1000 (see Note)
Note:
Email transmission (from the DX-1000 to a PC)
01007990004
Email reception (from a PC to the DX-1000)
01007990003
#@multitude
14
1. The email address format can be the same as your regular email address. If your email address is
popuser001@panasonic.com , the DX-1000's email address can be DX1000@panasonic.com .
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and
POP Server Names. If the DNS Server is not available, change the Fax Parameter No. 94 (DNS SERVER)
to "1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.
DX1000@fax01.panasonic.com
(Router)
popuser001@panasonic.com
DX1000@panasonic.com
(Router)
popuser001@panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP POP02.panasonic.com
POP3 (POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP POP02.panasonic.com
POP3 (POP Server)